accessories & hardware

The IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. This Recessed Housing is a Title 24 compliant, no screw based socket or other medium-based incandescent socket adapters are needed. • Input Voltage - 120 Vac• Input Frequency - 60 Hz• Dimensions - 14.63"(W. min) x 9.63"(D) x 4.5"(H)• Installation - ceiling joists & drop ceiling installations

Read more less

The IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. It is a Title 24 compliant, no screw based socket or other medium-based incandescent socket adapters are needed. • Input Voltage - 120 Vac• Input Frequency - 60 Hz• Dimensions - 14.63"(W. min) x 10.88"(D) x 5.38"(H)• IC-rated for direct insulation contact• Extendable hanger bars with nails included• ETL listed for damp locations• Certified to California JA8• Can be used to comply with Title 24 Part 6 requirements

Read more less

The IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. It is a Title 24 compliant, no screw based socket or other medium-based incandescent socket adapters are needed.   • Input Voltage - 120 Vac• Input Frequency - 60 Hz• IC-rated for direct insulation contact• ETL listed for damp locations• Use for remodel shallow ceiling

Read more less

The IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. It is a Title 24 compliant, no screw based socket or other medium-based incandescent socket adapters are needed.• Input Voltage - 120 Vac• Input Frequency - 60 Hz• IC-rated for direct insulation contact• ETL listed for damp locations• Use for remodel shallow ceiling               

Read more less

This canless down light mount plate offers perfect protection for your ceiling. Some times damage to the ceiling will happen when you pull out the canless downlight. You won't need to worry about this while you install the canless downlight onto the mount plate.. • Supports 4", 6" and 8" canless downlight• Durable steel plate  

Read more less

This emergency driver is designed to supply the power to LED lights during power outage, suitable for 3~200W lamp with internal or external led driver.With deep discharge protection and IP20 protection, it works perfect in most industry and commercial appliances. • UL listed• For use on a wide range of LED fittings• Output 150-200Vdc• Testing kits included• Deep discharge protection• IP20 rated

Read more less

The Surface Mounting Kits allows LED Panel Lights to be installed on the surface from the Ceiling while recessed mounting is not possible.This suspension kits are easy to install and can be compatible with most edge-lit and back-lit panel lights on the market. • Dimension: 12"(W) x 48"(D) x 3.15"(H)• Material: Aluminum with matte white finish• Easy to install• High quality aluminum

Read more less

The Surface Mounting Kits allows LED Panel Lights to be installed on the surface from the Ceiling while recessed mounting is not possible.This suspension kits are easy to install and can be compatible with most edge-lit and back-lit panel lights on the market. • Dimension: 24"(W) x 48"(D) x 3.15"(H)• Material: Aluminum with matte white finish• Easy to install• High quality aluminum  

Read more less

The Surface Mounting Kits allows LED Panel Lights to be installed on the surface from the Ceiling while recessed mounting is not possible.This suspension kits are easy to install and can be compatible with most edge-lit and back-lit panel lights on the market. • Dimension: 24"(W) x 24"(D) x 3.15"(H)• Material: Aluminum with matte white finish• Easy to install• High quality aluminum  

Read more less

The Suspension Mounting Wire kit allows LED Panel Lights to be hung from the Ceiling while recessed mounting is not possible. One end of the suspension kit screws to ceiling.This suspension kit is easy to install and can be compatible with all panels with screw on the back. • Stainless Steel Braided Cable for Residential & Commercial Suspended Grid Ceilings• Easy to Install - This Suspension Kit do not required professional installation.• Adjustable Hanging Cable, the height range can adjust from 0.33-5ft, and the max loading capacity of each suspension kit is approximately 50 lbs. † Package Includes: 2 suspension cable. (Note: 4 cables needed for panel/troffer light)  

Read more less

The extend power cable allows you to install the canless downlight at the location that far away from the power source, easy for you to arrange the lights. Available in 3ft and 10ft.  

Read more less

The high/low bay PIR occupancy sensor is designed for use in commercial and industrial installations. Typical applications include warehouses, distribution centers, parking garages and public area.The sensor is a line voltage sensor, no additional power pack is required. It uses passive infrared technology to detect motion, suitable for detecting tangential motion in area with stable ventilation and clear line of sight.The high bay version sensor supports mounting heights up to 40 ft while the low bay version sensor supports mounting heights 25 ft or less. Both versions provide 360˚ coverage.  • Features passive infrared technology.• 0~10V dimming sensor• 120~277 Vac universal input voltage.• Available in high bay and low bay version.• Max 30 ft detection radius with 360˚ coverage.

Read more less

The high/low bay PIR occupancy sensor is designed for use in commercial and industrial installations. Typical applications include warehouses, distribution centers, parking garages and public area.The sensor is a line voltage sensor, no additional power pack is required. It uses passive infrared technology to detect motion, suitable for detecting tangential motion in area with stable ventilation and clear line of sight.The high bay version sensor supports mounting heights up to 40 ft while the low bay version sensor supports mounting heights 25 ft or less. Both versions provide 360˚ coverage.  • Features passive infrared technology.• On/Off sensor• 120~277 Vac universal input voltage.• Available in high bay and low bay version.• Max 30 ft detection radius with 360˚ coverage.

Read more less

This Emergency Driver is designed to supply the power to LED lights during power outage, suitable for 3~200W lamp with internal or external led driver. 26W-200W lamp must be with 0/1-10V dimmer function.With deep discharge protection and IP20 protection, it works perfect in most industry and commercial appliances. Additional relay that can control standard LED driver. 90-minute constant emergency power Not intended for use in luminaries for high-risk task area lighting. Suitable for 25-200W lamp with internal LED driver 25W above lamp must be with 0-10V or 1-10V dimmer. Lamp power must be ≤ 25W when dimmer is at the lowest voltage.    

Read more less

This is a 6 feet Power cable.  It simple connects your light with the plug to the outlet.  You don't need to do any wiring.  

Read more less

The MUHB series Aluminum Reflector compatible with our MUHB series UFO High Bay Fixtures. It's designed to be easy installed, simple attach the reflector to designated points on the the UFO fixture. Made with high quality Aluminum, this reflector allows the lights to be more focus in the covered area, which also increase the efficiency.• Compatible with all MUHB series UFO High Bay Fixtures.• Easy to install

Read more less

6ft 3 Prong Plug Cord is designed for using with the UFO high bay fixtures, but it can be used with other major appliances, motors and power tools. 

Read more less

This Plug-In PIR Motion Sensor is designed for the High Bay Fixtures that being used in commercial and industrial installations. Typical applications include warehouses, distribution centers, parking garages and public area.This dimmable sensor. It's a low voltage sensor use 12-24V. It uses passive infrared technology to detect motion, suitable for detecting tangential motion in area with stable ventilation and clear line of sight.• Features passive infrared technology.• On/Off sensor• 12~24 Vac input voltage.• supports 0-10V dimming.• Max 40 ft detection radius with 360˚ coverage.

Read more less

The PC Reflector compatible with our UFO High Bay Fixtures. This PC Reflector provides 90 degree beam angles and it's designed to be easy installed, simple attach the reflector to designated points on the the UFO fixture. Made with high quality plastic, this reflector offers more soft light effect compare to the aluminum reflector, creates a comfortable working environment.

Read more less

The PC Reflector compatible with our UFO High Bay Fixtures. This PC Reflector provides 90 degree beam angles and it's designed to be easy installed, simple attach the reflector to designated points on the the UFO fixture. Made with high quality plastic, this reflector offers more soft light effect compare to the aluminum reflector, creates a comfortable working environment.

Read more less

The MUHB series Adjustable U-Mount Bracket compatible with all of our MUHB series UFO High Bay FixturesAllows you to install your UFO fixture directly to the wall and ceiling. Crafted from durable heavy duty steel, our U-Mount Bracket is built to withstand the rigors of commercial and industrial environments. Its sturdy construction ensures that your lighting fixtures are held securely in place, providing reliable and safe illumination for years to come. This U-Mount Bracket is designed to be easy install, simple attach to designated points on the fixture and mount with solid threaded conduit. • Heavy Duty • Compatible with all MUHB series UFO High Bay Fixtures.

Read more less

This 4 inch Fire Resistant Junction Box is the next generation Fire Resistant Electrical Outlet Box which specially designed for your lighting projects. It could be used as a Fire Resistant Recessed Housing, which means you can install either surface mount fixtures or most 4 inch recessed fixtures directly to this Fire Rated Electrical Box. It fits most of the standard 4” downlight retrofit kits on the market without any modifications. With this new design, your planing for the lighting projects will be more easier, it also helps you to save cost and time for your commercial projects. The Fire Resistant Box comes with hanger bars, which was designed for both ceiling joists installations and drop ceiling (with T-bar Grid) installations. It can be completely covered by thermal insulation. There are 8 knockout on this Fire Resistant Outlet Box, very easy for the wiring. Also, this Fire Rated Box may direct contact with any combustible material like ceiling joist or floor board safely. This Fire Resistant Electrical Outlet Box is a Title 24 compliant, Air-Tight and ETL listed product. It also conforms to UL 514A metallic outlet box, fire rated up to 2 hours and UL1598 recessed luminaire housing rated IC.

Read more less